TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
50
¾
Description:
A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the
Add New
button. The following
page will
appear, shown in Figure 4-32:
Figure 4-32
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the
MAC Address
field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example:
00:1D:0F:11:22:33.
2. Give a simple description for the wireless station in the
Description
field. For example:
Wireless station A.
3. Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4. Click
the
Save
button to save this entry.
To edit or delete an existing entry:
1. Click
the
Edit
in the entry you want to modify.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable/ Disabled Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to selected entries.
For example:
If you desire that the wireless station A with MAC address 00:1D:0F:11:22:33 and the
wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the Modem Router, but
all the other wireless stations cannot access the Modem Router, you can configure the
Wireless
MAC Address Filtering
list by following these steps:
1. Click
the
Enable
button to enable this function.
2. Select the radio button “
Allow the stations specified by any enabled entries in the list to
access
” for
Filtering Rules
.
3. Delete all or disable all entries if there are any entries already.
4. Click
the
Add New
button.
1) Enter the MAC address 00:1D:0F:11:22:33/00:0A:EB:00:07:5F in the
MAC Address
field.
2) Enter wireless station A/B in the
Description
field.
3) Select
Enabled
in the
Status
drop-down list.
4) Click
the
Save
button.
