TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
46
You can also keep the default WPS Status as
Enabled
and click the
Add device
button in Figure
4-26, then Choose “
Press the button of the new device in two minutes
” and click
Connect
.
(Shown in the following figure)
Figure 4-27
Step 2:
Press and hold the WPS button of the client device directly.
Step 3:
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 4:
When the WPS LED is on, the client device has successfully connected to the Modem
Router.
Refer back to your client device or its documentation for further instructions.
II. Enter the client device’s PIN on the Modem Router
Use this method if your client device has a Wi-Fi Protected Setup PIN number.
Step 1:
Keep the default WPS Status as
Enabled
and click the
Add device
button in Figure
4-26, then the following screen will appear.
Figure 4-28
