Allow Downgrade:
Displays the status of allowing downgrade of the new members
in the Auto Copy Software function.
Stack Member Info
UNIT:
Displays the unit number of the switch.
Role:
Displays the stack role of the switch in the stack. There are two
options: Master and Member.
Priority:
Displays the member priority of the switch. The higher the value
is, the more likely the member will be elected as the master.
State:
Displays the state of the switch.
MAC Address
Displays the unique identification of the switch.
Preconfigured
Device Type:
Displays the device type of the pre-configured switch.
Plugged-in Device
Type:
Displays the device type of the plugged-in switch.
Switch Description:
Displays the description of the switch.
Version:
Displays the current software version of the switch.
SFS Last Attempt
Status:
Displays the status of the last stack firmware synchronization.
Up Time:
Displays the system up time of the switch.
Stack Port Info:
Stack Port:
Displays the stack port number.
Type:
Displays the transceiver type of the stack port
Product Name:
Displays the transceiver product name of the stack port.
Configured Stack
Mode
：
Displays the configured mode of the stack port.
Running Stack
Mode
：
Displays the running mode of the stack port.
Link Status
：
Displays the link status of the stack port.
Link Speed:
Displays the link speed of the stack port.
Neighbor:
Displays the unit id of the switch directly linked on the stack
port.
5.1.2
Stack Config
On this page you can configure the basic parameters of the stack function.
Choose the menu
Stack
→
Stack Management
→
Stack Config
to load the following page.
49
