Running Priority:
Displays the running priority associated with the VRRP
group. It ranges from 1 to 255.
Advertise Timer:
Displays the advertise timer associated with the VRRP
group. It ranges from 1 to 255.
Preempt Delay
Timer:
Displays the preempt delay timer associated with the VRRP
group. It ranges from 0 to 255.
Preempt Mode:
Displays the preempt mode associated with the VRRP
group.
Authentication
Type:
Displays the authentication type associated with the VRRP
group.
Key:
Displays the key associated with authentication type. If the
authentication type is 'normal', it will display '--'.
Primary Virtual IP:
Displays the primary virtual IP associated with the VRRP
group.
Virtual MAC:
Displays the Virtual MAC address associated with the VRRP
group.
Tracked Interface:
Displays the tracked interface ID.
Reduced Priority:
Displays the reduced priority when the tracked interface is
'down'.
Back:
Click the button to go back to the VRRP Basic Config page.
Refresh:
Click the button to refresh this page.
10.10.2
Advanced Config
You can modify most of features of the VRRP on this page, including the description, priority,
preempt mode, advertisement. But you cannot add or delete a VRRP group.
Choose the menu
Routing → VRRP → Advanced Config
to load the following page.
Figure10-61 VRRP Advanced Config
Configuration Procedure:
Select your desired VRRP group and configure corresponding parameters according to your
needs. Then click
Apply
.
Entry Description:
Select:
Select one or more items.
245
