State:
The status of the policy on the interface. A policy is Up if
DiffServ is globally enabled, and if the interface is
administratively enabled and has a link. Otherwise, the status is
Down.
Policy:
The DiffServ policy associated with the interface.
12.3
Bandwidth Control
Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to
ensure network in working order, can be implemented on
Rate Limit
and
Storm Control
pages.
12.3.1
Rate Limit
Rate limit functions to control the egress traffic rate on each port via configuring the available
bandwidth of each port. In this way, the network bandwidth can be reasonably distributed and
utilized.
Choose the menu
QoS→Bandwidth Control→Rate Limit
to load the following page.
Figure 12-10 Rate Limit
Configuration Procedure:
1)
Configure the upper rate limit for the port to send packets.
2)
Click
Apply
.
313
