T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
20
Mode
Accessing Path
Prompt
Logout or Access the
next mode
Interface
Configuration
Mode
Layer 2 Interface:
Use
the
interface
gigabitEthernet
port
or
interface
range
gigabitEthernet
port-list
command to enter this mode
from Global Configuration
mode.
T2700G-28TQ(config-if)#
T2700G-28TQ(config-if- range)#
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or
the
#
command to return to
Global Configuration
mode.
A port number must be
specified in the
interface
command.
Layer 3 Interface:
Use the
no switchport
command to enter Routed Port
mode from Interface
Configuration mode.
Use the
interface vlan
vlan-id
command to enter VLAN
Interface mode from Global
Configuration mode.
Use the
interface loopback
id
command to enter Loopback
Interface mode from Global
Configuration mode.
T2700G-28TQ(config-if)#
T2700G-28TQ(config-if-
range)#
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or
the
#
command to return to
Global Configuration
mode.
DHCP
Configuration
Mode
Use the
ip dhcp server pool
pool-name
command to enter
DHCP Configuration Mode
from Global Configuration
mode.
T2700-28TQ(config-dhcp)
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or
the
#
command to return to
Global Configuration
mode.
MST
Configuration
Mode
Use the
spanning-tree mst
configuration
command to
enter this mode from Global
Configuration mode.
T2700G-28TQ(config- mst)#
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or the
#
command to return to
Global configuration mode.
Note:
1. The user is automatically in User EXEC Mode after the connection between the PC and the
switch is established by a console port or by a telnet connection.
2. Each command mode has its own set of specific commands. To configure some commands,
you should access the corresponding command mode firstly.
Global Configuration Mode
: In this mode, global commands are provided, such as the
Spanning Tree, Schedule Mode and so on.