manualshive.com logo in svg

TP-Link Archer VR300, User Manual, Page: 84 / 98

Share
Download
TP-Link Archer VR300 User Manual Download Page 84

80

Chapter 14

 

Administrate Your Network 

All devices or the specific device on the internet can log in to your router using the 
address displayed on the 

Manage This Router via the Address 

field to manage the 

modem router.

Tips:

1.  If you were warned about the certificate when visiting the web management page remotely, click 

Trust

 (or a similar option) to 

continue. To avoid this warning, you can download and install the certificate on the modem router’s web management page at 

Advanced 

> 

System Tools 

> 

Administration

.

2.  The router’s WAN IP is usually a dynamic IP. Please refer to 

Set Up a Dynamic DNS Service Account

 if you want to log in to 

the router through a domain name.

14  7   System Log

System Log can help you know what happened to your modem router, facilitating 
you to locate the malfunctions. For example when your modem router does not work 
properly, you will need to save the system log and send it to the technical support for 
troubleshooting.

1  

Visit

 

http://tplinkmodem.net

, and log in with your TP-Link ID or the password you 

set for the router. 

2  

Click 

Advanced 

> 

System Tools

 > 

System Log 

page.

 

¾

To view the system logs:

You can view specific system logs by selecting the log Type and  Level. 
Click 

Refresh

 to refresh the log list.

 

¾

To save the system logs:

Summary of Contents for Archer VR300



































































































Reviews:

No comments