manualshive.com logo in svg

TP-Link Archer VR300, User Manual, Page: 81 / 98

Share
Download
TP-Link Archer VR300 User Manual Download Page 81

77

Chapter 14

 

Administrate Your Network 

 

¾

To restore configuration settings

1  

Visit

 

http://tplinkmodem.net

, and log in with your TP-Link ID or the password you 

set for the router. 

2  

Click 

Advanced 

> 

System Tools

 > 

Backup & Restore 

page.

3  

Click 

Browse 

to locate the previous backup configuration file, and click 

Restore.

  

4  

Wait for the restoring and then the modem router will automatically reboot.

 

¾

To reset the modem router to factory default settings

1  

Visit

 

http://tplinkmodem.net

, and log in with your TP-Link ID or the password you 

set for the router. 

2  

Click 

Advanced 

> 

System Tools

 > 

Backup & Restore 

page.

3  

Click 

Restore

 to restore all configuration settings to default values, except your 

login and TP-Link ID information. Click 

Factory Restore 

to reset the modem router.

4  

Wait for the reset process to complete, and then the modem router will automatically 
reboot.

Note:

 

1.  During the resetting process, do not turn off the modem router. 
2.  We strongly recommend you back up the current configuration settings before resetting the modem router. 

14  4   Change the Administrator Account

Admin account is used to log in to the modem router’s web management page. You are 
required to set the admin account at first login. You can also change it on the web page. 

1  

Visit

 

http://tplinkmodem.net

, and log in with your TP-Link ID or the password you 

set for the router. 

2  

Go to

 Advanced 

> 

System Tools 

> 

Administration 

page. Locate the 

Account 

Management

 section.

Summary of Contents for Archer VR300



































































































Reviews:

No comments