manualshive.com logo in svg

TP-Link Archer VR300, User Manual, Page: 76 / 98

Share
Download
TP-Link Archer VR300 User Manual Download Page 76

72

Chapter 13

 

Specify Your Network Settings

13  7  2   Specify the 6rd Tunnel with Parameters Provided by Your ISP

Specify the 6rd tunnel with the parameters provided by my 6rd 
tunnel service provider.

1  

Visit 

http://tplinkmodem.net

, and log in with your TP-Link ID 

or the password you set for the router.

2  

Go to 

Advanced

 > 

Network

 > 

IPv6 Tunnel

.

3  

Tick the check box, select 

6rd

 as the tunneling mechanism 

and select a WAN connection from the drop-down list.

4  

According to the parameters provided by your ISP, choose 

Auto

 or 

Manual

. More parameters are needed if you choose 

Manual

.

5  

Click 

Save

.

Note:

If there is no available WAN connection to choose, make sure you have 

connected to the internet and the connection type is not Bridge.

Now you can visit the IPv6 websites with the 6rd tunnel.

Tips:

The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection 
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.

I want to:

How can I 

do that?

How can I 

do that?

Done!

Summary of Contents for Archer VR300



































































































Reviews:

No comments