TP-Link Archer C80 User Manual Download

Page: 8 / 94

Chapter 1

Get to Know About Your Router

LED Explanation

• Router Mode

LED

Status

Indication

(Power)

The system has started up successfully.

Flashing

The system is starting up or the firmware is being upgraded. Do

not disconnect or power off your router.

Off

Power is off.

(2.4GHz Wireless)

The 2.4GHz wireless band is enabled.

Off

The 2.4GHz wireless band is disabled.

(5GHz Wireless)

The 5GHz wireless band is enabled.

Off

The 5GHz wireless band is disabled.

(LAN)

At least one powered-on device is connected to the router’s LAN

port.

Off

No powered-on device is connected to the router’s LAN port.

(Internet)

Green On

Internet service is available.

Orange On The router’s Internet port is connected, but the internet service

is not available.

Off

The router’s Internet port is unplugged.

• Access Point Mode

LED

Status

Indication

(Power)

The system has started up successfully.

Flashing

The system is starting up or the firmware is being upgraded. Do

not disconnect or power off your router.

Off

Power is off.

(2.4GHz Wireless)

The 2.4GHz wireless band is enabled.

Off

The 2.4GHz wireless band is disabled.

(5GHz Wireless)

The 5GHz wireless band is enabled.

Off

The 5GHz wireless band is disabled.

(LAN)

At least one powered-on device is connected to the router’s LAN

port.

Off

No powered-on device is connected to the router’s LAN port.

(Internet)

Green On

Internet service is available.

Off

The router’s Internet port is unplugged.

Summary of Contents for Archer C80































































































Search results

Summary of Contents for Archer C80

Reviews:

Related manuals for Archer C80

Brands by name

Popular brands

TP-Link Archer C80, User Manual

Search results

Summary of Contents for Archer C80

Reviews:

Related manuals for Archer C80

Brands by name

Popular brands