TP-Link Archer C20i, User Manual

Page: 86 / 141

Archer C20i AC750 Wireless Dual Band Router
- 76 -
2. Click Edit or Delete as desired on the Edit column.
Click the Enable/ Disable Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete selected entries.
)
Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
Security
→
Remote Management page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
4.12.2 Port Triggering
Choose menu “ Forwarding
→
Port Triggering ”, you can view and add port triggering entry on this
page (shown in Figure 4-63). Some applications require multiple connections, like Internet games,
video conferencing, Internet telephoning and so on. Port Triggering is useful for those applications
that cannot work with a pure NAT router.
Figure 4-63 Port Triggering
¾
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger
this rule.
¾
Trigger Protocol - The protocol used for Trigger Ports, either TCP , UDP , or All (all
protocols supported by the router).
¾
Open Port - The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of
ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085,
3010-3030.
¾
Open Protocol - The protocol used for Open Port , either TCP , UDP , or ALL (all protocols
supported by the router).
¾
Status - The status of this entry, Enabled means the Port Triggering entry is enabled.
¾
Edit - To modify or delete an existing entry.
¾
Common Applications - Some popular applications already listed in the drop-down list of
Incoming Protocol .