TP-Link Archer C2, User Manual

Page: 65 / 143

Archer C2 AC750 Wireless Dual Band Gigabit Router
- 55 -

Note:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-36 .
Figure 4-36 WPA/WPA2 – Personal

Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the bottom of the router or can be found in Figure 4-31.

Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.

WPA /WPA2- Enterprise - It’s based on Radius Server.

Authentication Type - you can choose the version of the WPA security on the
drop-down list. The default setting is Automatic , which can select WPA ( Wi-Fi Protected
Access) or WPA2 ( WPA version 2) automatically based on the wireless station's
capability and request.

Encryption - You can select either Automatic , or TKIP or AES.

Note:
If you check the WPA/WPA2-Enterprise r adio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-37 .
Figure 4-37 WPA/WPA2 - Enterprise

Radius Server IP - Enter the IP address of the Radius server.

Radius Server Port - Enter the port number of the Radius server.