TL-WN321G
54M Wireless USB Adapter
User Guide
- 16 -
)
Note:
To build a successful connection by QSS, you should also do the corresponding configuration of
the Access Point for QSS or WPS function meanwhile
.
PIN Method
If your Access Point supports Wi-Fi Protected Setup and the PIN method, you can add the
adapter to the network by the following two ways:
1) Enter a PIN from my Access Point
Choose the
Config Mode
as
Registrar
and enter the PIN of AP into the field under the
Pin Code
as Figure 3-9 shown.
And then click
PIN
button to start the wireless connection without doing any
configuration for AP.
Figure 3-9 QSS - Registrar mode
)
Note:
The default PIN code of the AP always can be found in its label or User Guide.
2) Enter the PIN into my Access Point
Choose the
Config Mode
as
Enrollee
and click the
PIN
button on the screen as Figure 3-10.
Meanwhile, enter the PIN code of the adapter into the configuration utility of the AP. For the
detailed instructions of the AP configuration, please refer to the User Guide of the AP.
Figure 3-10 QSS - enrollee mode
