
85
GB
DEHUMIDIFIER / AIR PURIFIER
3. Clean the Pre-
fi
lter
If the Pre-
fi
lter is too dirty, you can wash it with lukewarm water and neutral
detergent, and then dry it thoroughly before putting it back in place. Dry it
thoroughly in a shady place before reinstalling it. Do not use an electrostatic
cloth or brush to clean the Pre-Filters. They can be damaged.
4. Clean the Composite HEPA/ACTIVE CARBON
fi
lter
Remove the Composite
fi
lter, clean its surface with a vacuum cleaner, and
then install the
fi
lter back into the device.
WARNING! DO NOT
wash the composite
fi
lter with water.
5. After cleaning, put the Composite
fi
lter and Pre-
fi
lter back to the device,
fi
rst
install the Composite
fi
lter and then the Pre-Filter.
NOTES:
• Do not use water with temperature over 40°C to clean the Pre-
fi
lter.
•
Dry it very well in a shady place. Do not dry the Pre-Filter with a hair dryer
or other heating device and do not expose it to direct sunlight. They may
catch
fi
re, deform and damage.
•
When the composite
fi
lter is used for a long term, if there is a need to
replace it (damaged or too dirty), please purchase a new
fi
lter from the
authorized service center.
•
Do not start the device, If the
fi
lter is not put back in place, otherwise the
device may absorb dust easily an affect the dehumidi
fi
cation effect.