Toyotomi Laser Clean LC-41 Instruction Manual Download Page 9

8

The childproof lock can be used to prevent children accidentally

changing the heater settings. When the heater is burning and

the childproof lock is on, the heater can only be switched off.

Other functions are blocked then. If the heater has already been

switched off, the childproof lock also prevents accidental

ignition of the heater.

Activate the childproof lock by pressing the Key-lock button and holding it down for

more 3 seconds. The Key-lock indicator will light up indicating that the childproof lock

has been activated. Switch off the childproof lock by pressing the Key-lock button and

holding it down for more than 3 seconds once again.

CHILDPROOF LOCK

When the VENT indicator starts blinking, this is a sign that the

room is not vented sufficiently. If you do not provide additional

ventilation, the heater will switch off automatically after some

time. If the indicator light continues blinking after extra

ventilation, please contact your dealer.

VENTILATION INDICATOR

When the Fuel Indicator lights up, it means that there is only fuel left

for 10 more minutes. The count-down of the remaining heating time

can be seen in the Digital indicator. Now you have two options:

you remove the removable fuel tank and refill it outside the

living room or 

you push the Extension key. By pushing this button, the remaining heating time will

extend to 90 minutes. The heater will automatically switch back to its lowest

position. In the display the number 90 will appear, which will decline to 10. At the

arrival of 10, you will hear an alarm signal every two minutes, warning you to refill

the removable tank. If you do not react, the heater will extinguish by itself. The

heater will also sound a warning signal, when it switches off. The Fuel Indicator will

blink, while four lines (--:--) are blinking in the Digital indicator. You can stop this by

pressing the

button once more.

Once the heater has used up all its fuel and extinguished, it will take some time, after

the refill, before the heater is completely ready for use again.

FUEL INDICATOR

 LC-41  10.7.21 2:48 PM  ページ 8

Summary of Contents for Laser Clean LC-41
















Reviews: