Toyotomi Laser Clean LC-41 Instruction Manual Download Page 2

SPECIFICATIONS

1

MODEL

HEAT RATING

FUEL TANK CAPACITY

BURNING TIME

DIMENSIONS( W x D x H)

WEIGHT

VOLTAGE / FREQUENCY

ELECTRICAL CONSUMPTION

LC-41

14,300 BTU / 4.2 kW

  3,800 BTU / 1.1 kW

7.6 lit.

19.0 ~69.0 hrs.

550 x 328 x 445 mm

12.0 kg

230V AC, 50 HZ

Igniter : 320 W

Continuous : 29 W

High

Low

* Matching Room Size to HEAT RATING

Because the “Heat Load” of an area to be
heated is influenced by so many factors, it is
impossible to specify a heater output to an
exact room size.

If you use a heater too large for the area to
be heated, the temperature you desire will
be reached quickly. In such cases, to avoid
overheating the area, the heater must be
turned off frequently, or doors opened to
other areas of the house, or windows to the
outside opened to cool the area.

If you use a heater too small for the area to
be heated, it will take much longer to reach
the desired temperature, in fact it may not
be reached at all depending on the outside
weather conditions.

PART NAME

BEFORE USING HEATER, FAMILIARIZE YOURSELF WITH THE FOLLOWING OPERATING

CONTROLS AND PART NAMES.

MAIN BODY

Front panel

Louver

operation panel

Removable fuel tank

Circulation 
fan

Room 
thermistor

Power supply
cord

Air filter

Carrying 
handle

Top plate

 LC-41  10.7.21 2:48 PM  ページ 1

Summary of Contents for Laser Clean LC-41
















Reviews: