Toyota TUNDRA 2004 Owner'S Manual Download Page 444

Page: 444 / 478

’04 TUNDRA_U (L/O 0309)

435

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

1. Open the hood. Unplug the connec-

tor. Remove the rubber cover.

If the connector is tight, wiggle it.

2. Release the bulb retaining spring

and remove the bulb. Install a new
bulb and the bulb retaining spring.

To install a bulb, align the tabs of the
bulb with the cutouts of the mounting

hole.

“TOP PULL” mark

3. Install the rubber cover with the

“TOP PULL” mark upward, and fit it
securely on the boss. Then plug in

the connector.

Make sure the rubber cover fits securely

on  the  bulb  base  and  the  mounting  body.
Aiming  is  not  necessary  after  replacing
the  bulb.  When  aiming  adjustment  is  nec-

essary, contact your Toyota dealer.

—Headlights

Summary of Contents for TUNDRA 2004































































































































































































































































































































































































































































































Search results

Summary of Contents for TUNDRA 2004

Reviews:

Related manuals for TUNDRA 2004

Brands by name

Popular brands

Toyota TUNDRA 2004, Owner'S Manual

Search results

Summary of Contents for TUNDRA 2004

Reviews:

Related manuals for TUNDRA 2004

Brands by name

Popular brands