’04 TUNDRA_U (L/O 0309)
302
2004 TUNDRA from Sep. ’03 Prod. (OM34426U)
If the center panel does not contact your
garage door opener transmitter:
#
Check to see if spacer is on the cor-
rect pin.
#
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
CAUTION
#
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
#
Keep the remaining spacers away
from children.
Standard and access cab models only—
The auxiliary box (stored in the glove
box) and garage door opener box are
interchangeable.
Removing the cover—
Half open the cover. Pinch each hinge and
pull it out of its pivot one at a time as
shown above.
Do not remove the cover forcibly.
Summary of Contents for TUNDRA 2004
