Toyota RAV4 PRIME 2021, Manual

Page: 479 / 618

479
7-3. Do-it-yourself maintenance
7
Maintena
nce
a
nd ca
re
registered wheel set is possi-
ble, mixing between these
wheel sets is not supported.
■
How to change between
wheel sets
1
Have the vehicle fitted with
the preferred wheel set.
2
Press or of the meter
control switches on the steer-
ing wheel and select
.
3
Press or of the meter
control switches and select
“Vehicle Settings”, and then
press and hold
.
4
Press or of the meter
control switches and select
“TPWS”, and then press
.
5
Press or of the meter
control switches and select
“Identify Wheel”. Then press
and hold
until the tire
pressure warning light starts
slowly blinking 3 times.
Afterward, the tire pressure
warning light turns on after
flashing for 1 minute.
After 2 minutes, registration of a
second wheel set is being per-
formed. The tire pressure warn-
ing light will turn off and “--” will
be displayed for the inflation
pressure of each tire on the
multi-information display.
6
Initialize the tire pressure
warning system. (

P.474)
If the tire inflation pressure settings
for the installed tires change, initial-
ization operations are required, but
if the tire inflation pressure settings
are the same, initialization is not
required.
7
Drive straight (with occa-
sional left and right turns) at
approximately 25 mph (40
km/h) or more for approxi-
mately 10 to 30 minutes.
Registration of a second wheel set
is complete when the tire pressure
warning light turns off and the infla-
tion pressure of each tire is dis-
played on the multi-information
display.