Toyota RAV4 2019 Owner'S Manual Download Page 123

Page: 123 / 244

123

4-2. Radio operation

Au
dio/visu

al system

4-2.Radio operation

The radio operation screen can
be reached by the following
methods:



P.119

Select to display the audio
source selection screen.

Select to display the preset
stations screen. (



P.124)

Select to display the cache
radio operation screen.
(



P.124)

Select to display a list of
receivable stations. (



P.125)

Select to display the radio
options screen. (



P.125)

Select to display the sound
setting screen. (



P.120)

Select to tune to preset sta-
tions/channels. (



P.124)

Displays items on the chan-
nels registered to smart

favorites (



P.129, P .145)

Displays the artist info and
song title or album
Select to change the dis-
played information.
Displays messages when
available

Displays cover art, station
logo, etc.

Displays information about
the song/track currently
being played

Select to display HD) multi-
cast channels available.
(



P.127)

Press to seek for stations in
the relevant program
type/channel category.
Press and hold for continu-
ous seek.

Turn to step up/down fre-
quencies/channels.
Turn to move up/down the
station list. Also, the knob
can be used to enter selec-
tions on the list screens by

AM/FM/SiriusXM (SXM)

radio

Overview

Control screen

Control panel

Summary of Contents for RAV4 2019




















































































































































































































































Search results

Summary of Contents for RAV4 2019

Reviews:

Brands by name

Popular brands

Toyota RAV4 2019, Owner'S Manual

Search results

Summary of Contents for RAV4 2019

Reviews:

Brands by name

Popular brands