Toyota RAV4 2019 Owner'S Manual Download Page 109

Page: 109 / 244

109

3-4. Setup

Navig

ation system

Select the desired item to
search for the location.
(



P.80)

Select “OK”.

Confirm the route overview
displayed.

Select the desired route from
3 possible routes. (



P.88)

Select to modify the route.
The routes can be adjusted
by setting preferred roads.
(



P.109)

Select “OK”.

●

Up to 5 routes can be registered.

Select “Edit”.

Select the desired traffic
route.

Select the desired item to be
edited.

Select to edit the name of the
personal traffic route.
(



P.108)

Select to edit start location.
(



P.108)

Select to edit end location.
(



P.108)

Select to see and modify the
entire route. (



P.109)

Select “OK”.

Follow the steps in “Register-
ing personal traffic routes”
from step

. (



P.108)

Select “Delete”.

Select the desired traffic
route to be deleted and
select “Delete”.

Select “Yes” when the confir-
mation screen appears.

“My Traffic Routes” can be
adjusted by setting up to 2 pre-

Editing personal traffic
routes

Deleting personal traffic
routes

Setting preferred roads

Summary of Contents for RAV4 2019




















































































































































































































































Search results

Summary of Contents for RAV4 2019

Reviews:

Brands by name

Popular brands

Toyota RAV4 2019, Owner'S Manual

Search results

Summary of Contents for RAV4 2019

Reviews:

Brands by name

Popular brands