Toyota Rav 2010 Quick Reference Manual Download Page 403

Page: 403 / 527

382

4-3. Do-it-yourself maintenance

■

If the key battery is depleted

The following symptoms may occur.

●

The smart key system and wireless remote control will not function prop-
erly.

●

The operational range is reduced.

■

Use a CR2016 (vehicles without smart key system) or CR1632 (vehicles
with smart key system) lithium battery

●

Batteries can be purchased at your Toyota dealer, jewelers, or camera
stores.

●

Replace only with the same or equivalent type recommended by your
Toyota dealer.

●

Dispose of used batteries according to the local laws.

CAUTION

■

Removed battery and other parts

Keep away from children.

These parts are small and if swallowed by a child they can cause choking.

Remove the depleted battery.

Insert a new battery with the
“+” terminal facing up.

STEP

Summary of Contents for Rav 2010
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands

Toyota Rav 2010, Quick Reference Manual

Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands