Toyota Rav 2010 Quick Reference Manual Download Page 192

Page: 192 / 527

170

2-3. Operating the lights and wipers

■

The windshield wipers and washer can be operated when

Vehicles without smart key system

The engine switch is in the “ON” position.

Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

■

If no windshield washer fluid sprays

Check that the washer nozzles are not blocked and if there is washer fluid in
the windshield washer fluid reservoir.

NOTICE

■

When the windshield is dry

Do not use the wipers, as they may damage the windshield.

■

When there is no washer fluid spray from the nozzle

Damage to the washer fluid pump may be caused if the lever is pulled
toward you and held continually.

■

When a nozzle is blocked

Do not try to clear it with a pin or other object. The nozzle will be damaged.

Wash/wipe operation

Wipers operate automatically.

Summary of Contents for Rav 2010
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands

Toyota Rav 2010, Quick Reference Manual

Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands