Toyota Rav 2010 Quick Reference Manual Download Page 283

Page: 283 / 527

261

3-2. Using the audio system

Inte

rior fe

atures

■

Adjusting the Automatic Sound Levelizer (ASL)

Type A and B

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi-
cle speed.

Type C

When “ASL” is selected, turning

to the right turns “ASL” on,

and turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to the
noise level as you drive your vehicle.

■

Trademark owned by SRS Labs, Inc. (type A)

The audio systems utilize SRS FOCUS

and SRS TruBass

audio

enhancement technologies, under license from SRS Labs, Inc., in all modes
except AM radio mode.

FOCUS, TruBass, SRS and

symbols are trademarks of SRS Labs,

Inc.

FOCUS and TruBass technologies are incorporated under license from
SRS Labs, Inc.

Summary of Contents for Rav 2010
















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands

Toyota Rav 2010, Quick Reference Manual

Search results

Summary of Contents for Rav 2010

Reviews:

Related manuals for Rav 2010

Brands by name

Popular brands