Toyota PRUS V 2020 Owner'S Manual Download Page 195

Page: 195 / 467

193

4-3. Operating the lights and wipers

riv

PRIUS v_OM_OM47D92E_(AE)

When all of the following conditions are fulfilled, high beam will be
automatically turned on (after approximately 1 second):

●

Vehicle speed is above approximately 30 km/h (19 mph).

●

The area ahead of the vehicle is dark.

●

There are no oncoming or preceding vehicles with headlights or tail
lights turned on.

●

There are few streetlights on the road ahead.

If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:

●

Vehicle speed drops below approximately 25 km/h (16 mph).

●

The area ahead of the vehicle is not dark.

●

Oncoming or preceding vehicles have headlights or tail lights
turned on.

●

There are many streetlights on the road ahead.

High beam automatic turning on or off conditions

Summary of Contents for PRUS V 2020




















































































































































































































































































































































































































































































Search results

Summary of Contents for PRUS V 2020

Reviews:

Brands by name

Popular brands

Toyota PRUS V 2020, Owner'S Manual

Search results

Summary of Contents for PRUS V 2020

Reviews:

Brands by name

Popular brands