Toyota PRUS V 2020 Owner'S Manual Download Page 141

Page: 141 / 467

139

3-3. Adjusting the seats

rati

on
of e
ac

h c
om
pon
ent

PRIUS v_OM_OM47D92E_(AE)

Park the vehicle in a safe place.

Apply the parking brake firmly and shift the shift position to P. (



P. 181)

Adjust the position of the front seat and the angle of the seatback.
(



P. 134)

Depending on the position of the front seat, if the seatback is folded back-
ward, it may interfere with the operation of the second seat.

Uncouple and stow the second center seat belt. (



P. 34)

Lower the head restraint of the second seat. (



P. 146)

Pull up the lever (either

) and tilt the seatback for-

ward.

Press the seat-folding button.

The  seats  will  be  folded  forward.
Gently  rock  the  seats  back  and
forth  to  ensure  that  they  are
securely locked.

Before folding down the seatbacks

Folding down the seatbacks

Summary of Contents for PRUS V 2020




















































































































































































































































































































































































































































































Search results

Summary of Contents for PRUS V 2020

Reviews:

Brands by name

Popular brands

Toyota PRUS V 2020, Owner'S Manual

Search results

Summary of Contents for PRUS V 2020

Reviews:

Brands by name

Popular brands