Toyota passo, User Manual

Page: 150 / 340

2-4.
Using the equipment of other traveling
■
Information on restarting the engine
●
When you do either of the following to the engine is stopped, the engine
automatically restarts
The.
- When you release your foot off the brake
pedal
- Depress and release the brake pedal when more
strongly
- When I stepped on the accelerator
pedal
- The shift lever
R
-
P
When set to
- The shift lever
N
Time after to, the other to shift position
-
Stop & Start
When you press the cancel switch
-
-
When you press the (vehicles equipped with
automatic air conditioning)
(Vehicles equipped with manual air
conditioning), The (vehicles equipped with automatic
air conditioning)
(However, the vehicles equipped with automatic air conditioning, due to
circumstances such as the outside temperature when you press
May be until you restart the engine, time-consuming).
- When I opened the door the
driver's seat
- Remove the driver's seat when the seat belt
●
The engine is stopped, the next time while the engine may be restarted automatically
Be. (
Stop & Start
After the indicator blinks green, then turns off)
- When the brake booster negative pressure was
reduced
- When a large amount of battery discharge
- When the vehicle began to move in, such as
slope
- Such as the warning light is lit, each electronic control system (engine,
automatic
Electronically controlled transmission,
ABS
,
VSC
*
TRC
*, And air conditioners)
Always occurs when
- When the cooling time, the temperature of the air outlet of air conditioning has
increased (auto air conditioning
Vehicle-mounted)
-
PTC
* When the heater has been activated
- Stop engine about
Three
When the minutes have
elapsed
*
:
Different equipment and optional equipment such as
vehicle type
148