© Toyota Motor Corporation Australia Ltd. 2011. All rights reserved.
REPAIR MANUAL REFERENCE
LANDCRUISER - Steel S/Cab Tray Body
ISSUE: 27/07/2012
Page
Refer to ServiceNet
Accessory Part No.: PZQ8460320
Fitting Instr. Part No.: PZQ8460320-FI
10 of 35
IMPORTANT -
Wrap tail lights in a clean cloth to prevent
damage while storing
STEP
2
Unplug, then unbolt the tail light assemblies from the
chassis and discard the fixings.
Remove the tail lights from the temporary tail light
brackets and retain the tail lights, screws and white
plastic retainers in a safe area for later use.
Discard the original tail light brackets.
Unplug and unwind
harness
Remove and
discard fixings
Original Tail
Light Bracket
IMPORTANT -
Take care not to damage any components
of the vehicle
STEP
1
Using a 17mm socket, remove the spare tyre from the
vehicle chassis, as shown in adjacent diagram.
Remove and discard Steel Frame and “J” Bolt from
underneath tyre.
Disconnect wiring harness from registration plate
bracket.
Remove registration plate bracket from chassis and
set aside for later fitment.
IMPORTANT -
Take care not to damage any components
of the vehicle
STEP
3
Unbolt the fuel filler from the temporary bracket
mounted to the chassis pad.
Discard the original fuel bracket.
Original fuel Bracket
Chassis Mount Pad
Remove and
discard fixings
