42
LONG
(default setting)
MIDDLE
SHORT
ADJUSTING DISTANCE
To change the vehicle-to-
vehicle distance
Push the “
” button to
cycle through the settings,
which will change progressively.
Preceding vehicle
mark
(1)
(2)
(3)
This mode employs a radar sensor to detect the presence of vehicles up to
a ro imate y
ft
m ahead, determines the current vehic e to vehic e
following distance and operates to maintain a preset following distance from the
vehicle ahead. These distances vary based on vehicle speed.
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system a
ies the ra es the ra e ights wi come on at this
time . he system wi res ond to changes in the s eed of the vehic e ahead
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
TOYOTA SAFETY SENSE
Summary of Contents for Land Cruiser 2020
Page 59: ......