22. DISCONNECT EV CHARGER WIRE (w/
Quick Charging Inlet)
Caution:
Wear insulated gloves.
(1) Using a screwdriver, move the 2 lock levers as
shown in the illustration and disconnect the 2
electric vehicle battery assembly connectors
from the EV charger wire.
Notice:
Cover the connectors of the EV charger wire
and the electric vehicle battery assembly
connector with tape that does not leave adhesive residue to prevent foreign matter or
water droplets from entering.
Lock Lever
23. DISCONNECT FRAME WIRE
Caution:
Wear insulated gloves.
(1) Using a screwdriver, move the 2 lock levers as
shown in the illustration and disconnect the 2
electric vehicle battery assembly connectors
from the frame wire.
Notice:
Cover the connectors of the frame wire and
the electric vehicle battery assembly
connector with tape that does not leave
adhesive residue to prevent foreign matter
or water droplets from entering.
Lock Lever
24. DISCONNECT NO. 2 FRAME WIRE
Caution:
Wear insulated gloves.
Lock
(1) Disengage the clamp and disconnect the
electric vehicle battery assembly wire from the
wiring harness clamp bracket.
(2) Using a screwdriver, slide the lock as shown in
the illustration and disconnect the electric
vehicle battery assembly connector from the
No. 2 frame wire.
Notice:
Cover the connectors of the frame wire and
the electric vehicle battery assembly connector with tape that does not leave
adhesive residue to prevent foreign matter or water droplets from entering.
26
