Toyota INNOVA Owner'S Manual Download Page 39

Page: 39 / 754

1-1. For safe use

INNOVA_OM_OM71301E_(GE)

For safe driving

Adjust the angle of the seat-
back so that you are sitting
straight up and so that you do
not have to lean forward to
steer. (



P. 165)

Adjust the seat so that you can
depress the pedals fully and so
that your arms bend slightly at
the elbow when gripping the
steering wheel. (



P. 165)

Lock the head restraint in place with the center of the head restraint
closest to the top of your ears. (



P. 176)

Wear the seat belt correctly. (



P. 40)

Make sure that all occupants are wearing their seat belts before driv-
ing the vehicle. (



P. 40)

Use a child restraint system appropriate for the child until the child
becomes large enough to properly wear the vehicle’s seat belt.
(



P. 62)

Make sure that you can see backward clearly by adjusting the inside
and outside rear view mirrors properly. (



P. 180, 181)

For safe driving, adjust the seat and mirror to an appropriate
position before driving.

Correct driving posture

Correct use of the seat belts

Adjusting the mirrors

Summary of Contents for INNOVA



















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for INNOVA

Reviews:

Related manuals for INNOVA

Brands by name

Popular brands

Toyota INNOVA, Owner'S Manual

Search results

Summary of Contents for INNOVA

Reviews:

Related manuals for INNOVA

Brands by name

Popular brands