Toyota INNOVA Owner'S Manual Download Page 500

Page: 500 / 754

499

5-24. Bluetooth

Au
dio
sy
s

tem

INNOVA_OM_OM71301E_(GE)



In other situations



Vehicles without smart entry & start system

The Bluetooth

connection status is displayed at the top of the screen each

time the engine switch is turned to the “ACC” or “ON” position.



Vehicles with smart entry & start system

The Bluetooth

connection status is displayed at the top of the screen each

time the engine switch is turned to ACCESSORY or IGNITION ON mode.

Connection confirmation display on this system is set to on.



To turn off the display, set connection confirmation display on this
system to off. (



P. 457)

Even though all conceivable measures have been taken, the symptom sta-
tus does not change.

The cellular phone is not close enough to this system.



Bring the cellular phone closer to this system.

The cellular phone is the most likely cause of the symptom.



Turn the cellular phone off, remove and reinstall the battery pack,
and then restart the cellular phone.



Enable the cellular phone’s Bluetooth

connection.



Stop the cellular phone’s security software and close all applica-
tions.



Before using an application installed on the cellular phone, care-
fully check its source and how its operation might affect this
system.

Summary of Contents for INNOVA



















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for INNOVA

Reviews:

Related manuals for INNOVA

Brands by name

Popular brands

Toyota INNOVA, Owner'S Manual

Search results

Summary of Contents for INNOVA

Reviews:

Related manuals for INNOVA

Brands by name

Popular brands