Toyota IHF1700, Owner'S Manual

Page: 22 / 176

Bluetooth
®
21
Resuming the held call
A press and release of the SEND button while a call is held will resume the call.
Accepting a waiting call
When you are in a call, an audible beep signals an incoming call. The blue LED will flash fast.
Press and release the SEND button to place the active call on hold and answer the waiting
call.
The blue LED will stop flashing fast when the waiting call is accepted.
Rejecting a waiting call
While there is a waiting call, a press and release of the END button to reject the waiting call.
Switching between active call and held call
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “SWITCH CALL”.
The hands-free system responds: Switching active calls.
Or use the UIM:
A press and release of the SEND button will switch between the held and
active calls.
Ending the active call while a call is held
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “HANG UP”.
The hands-free system responds: Call ended.
The held call is automatically resumed.
Or use the UIM: A press and release of the END button will end the active call, while a call is
held.
Make an outgoing call while in an active call
When in an active call, you can make an outgoing call with the “DIAL NUMBER” and “CALL
<NAME>” VR commands which are also available in the call menu. The active call will be
placed on hold.
When dialling a new call, the active call will be put on hold. You can then use the
“CONFERENCE” command to join the calls into a -way conference.
Joining the active call and held call into a 3-way conference
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “CONFERENCE”.
The hands-free system responds: Starting conference.
EN_BT_IHF1700_OM.indd 21 26-10-2007 13:42:42