Toyota IHF1700, Owner'S Manual

Page: 21 / 176

20 Bluetooth
®
Unmuting the call
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “UNMUTE”.
The hands-free system responds: Call unmuted.
The blue LED will stop flashing.
Or use the UIM: A press and hold of either VOLUME button while the call is muted will
unmute the microphone.
Transferring the hands-free call to your handset device
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “PRIVACY MODE”.
The hands-free system responds: Privacy mode, and transfers the call to the handset device.
Or use the UIM: During a hands-free call, a press and hold of the SEND button will transfer
the hands-free call to privacy mode.
Transferring a call on your handset device to hands-free
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “HANDS-FREE MODE”.
The hands-free system responds: Hands-free mode, and transfers the call to the hands-free
system.
Or use the UIM:
During a private call, a press and hold of the SEND button will transfer the
call to the hands-free system.
Note:
Some handset devices will disconnect the Bluetooth
®
link to the system when the call is
switched to privacy mode. In this case the ‘Call menu’ will not be available. To quickly switch
the call to hands-free, press and hold the UIM’s SEND button.
Sending DTMF tones
1 Press and release the MULTI-FUNCTION button.
The hands-free system responds: Call menu. {Say a command}.
2 When prompted, say “ENTER <DIGITS>” to send digits as DTMF tones. You can also use * and
# characters.
Note:
You can send DTMF tones from the handset device’s keypad.
Placing the call on hold
A press and release of the SEND button will put the active call on hold.
EN_BT_IHF1700_OM.indd 20 26-10-2007 13:42:41