Toyota FORKLIFT 5FD 7 0-30 Series, Manual

Page: 12 / 71

PRECOAT BOLTS
(Bolts with seal lock agent coating on threads)
1.
Do not use the precoat bolt as i t i s i n e i t h e r
of the following cases:
(a) After i t is removed.
When the precoat bolt is moved
ened or tightened) by tightness check,
etc.
Note :
.
For torque check, use the lower limit the
allowable tightening torque range. If the
bolt moves, retighten it t o the
steps below.
2.
Method for reuse of precoat bolts
Wash bolt and threaded hole. (The
Perfectly dry the washed parts by air
threaded hole must be washed even for
blowing.
replacement of the bolt.)
(3) Coat the specified seal lock agent to the
threaded portion of the bolt.
PRESSURE HOSE FITTING TIGHTENING TORQUE
When connecting a high pressure hose, wipe the hose fitting and mating nipple contact surfaces with
clean cloth to remove foreign matters and dirt. Also check no dent or other damage on the contact
surfaces before installation.
2. When connecting a high pressure hose, hold the hose to align the fitting with the nipple and tighten
the fitting.
3.
The maximum tightening torque must not exceed standard tightening torque.
Nominal diameter
of screw
6
-
9/16
-
-
7/8
-
11/16
-
15/16
-
P
P
Hose inside
d
6
9
12
12
19
25
9
9
12
19
25
Standard tightening torque
kg-m b)
Standard
2.5 18.1)
5.0 36.2)
6.0 43.4)
6.0
(
43.4)
12.0 86.8)
14.0 (101.2)
5.0 36.2)
5.0 36.2)
6.0 43.4)
12.0 86.8)
14.0 (101.2)
Tightening range
2.4 2.6 (17.4 18.8)
4.8 5.3 (34.7 38.3)
5.7 6.3 (41.2- 45.5)
5.7 6.3 (41.2 45.5)
12.6 (82.4- 91.1)
13.3 14.7 (96.2 106.3)
4.8 5.3 (34.7 38.3)
4.8 5.3 (34.7 38.3)
5.7 6.3 (41.2 45.5)
(82.4- 91.1)
13.3 14.7 (96.2 106.3)