Toyota Echo 2001 Page 18 Owner'S Manual Download

Page: 18 / 237

2001MY ECHO (U) L/O0008

2001 ECHO (OM52440U)

SU12051

1. Using a coin or equivalent, open the

transmitter case.

SU12058

2. Remove the discharged transmitter bat-

tery.

NOTICE

Do not bend the terminals.

SU12059

3. Put a new transmitter battery with posi-

tive (+) side up.

Close the transmitter case securely.

NOTICE

Make  sure  the  positive  side  and
negative  side  of  the  transmitter  bat-
tery  should  be  faced  correctly.

Be  careful  not  to  bend  the  electrode
of  the  transmitter  battery  insertion
and  that  dust  or  oils  do  not  adhere
to  the  transmitter  case.

Close the transmitter case securely.

Summary of Contents for Echo 2001














































































































































































































































Search results

Summary of Contents for Echo 2001

Reviews:

Related manuals for Echo 2001

Brands by name

Popular brands

Toyota Echo 2001, Owner'S Manual

Search results

Summary of Contents for Echo 2001

Reviews:

Related manuals for Echo 2001

Brands by name

Popular brands