Toyota Echo 2001 Owner'S Manual Download Page 228

Page: 228 / 237

2001MY ECHO (U) L/O0008

215

2001 ECHO (OM52440U)

Service specifications

ENGINE

Valve clearance (engine cold), mm (in.):

Intake

0.15–0.25 (0.006–0.010)

Exhaust

0.25–0.35 (0.010–0.014)

Spark plug type:

DENSO

K16R–U

NGK

BKR5EYA

Spark plug gap, mm(in.):

0.8 (0.031)

Drive  belt  tension  measured  with  Bor-
roughs  drive  belt  tension  gauge  No.
BT–33–73F  (used  belt),  lbf:

Generator belt

100

Power steering pump belt

ENGINE LUBRICATION

Oil capacity (drain and refill), L (qt., Imp.
qt.):

With filter

3.7 (3.9, 3.3)

Without filter

3.4 (3.6, 3.0)

Oil grade:

API grade SJ, “Energy–Conserving” or
ILSAC multigrade engine oil is recom-
mended.

Recommended oil viscosity (SAE):

COOLING SYSTEM

Total capacity, L (qt., Imp. qt.):

Manual transmission

4.4 (4.7, 3.9)

Automatic transmission

4.3 (4.5, 3.8)

Coolant type:

“TOYOTA Long Life Coolant” or equiva-
lent

With ethylene–glycol type coolant for a
proper corrosion protection of aluminum
components

Do not use alcohol type antifreeze or
plain water alone.

BATTERY

Open voltage

∗

at 20

C (68

F):

12.6–12.8 V

Fully charged

12.2–12.4 V

Half charged

11.8–12.0 V

Discharged

∗

: Voltage that is checked 20 minutes af-

ter the key is removed with all the lights
turned off

Charging rates:

5 A max.

Summary of Contents for Echo 2001














































































































































































































































Search results

Summary of Contents for Echo 2001

Reviews:

Toyota Echo 2001, Owner'S Manual, Page: 228 / 237

Search results

Summary of Contents for Echo 2001

Reviews: