TOYOTA CAMRY
(GAS AND HV)
2022 -
DASHCAM
(Digital Video Recorder)
Procedure
Page 15 of 16 pages
Issue: A 07/25/2021
17. Camera Angle Adjustment
In case the camera angle adjustment
does not match what is intended for this
vehicle (2 visible recessed lines under
the lens) then this angle can be adjusted
as follows.
(Fig 17-1)
DO NOT try to force the lens to move the
camera – it is locked in place and
damage may occur.
(a) Using a 1.5 mm size Allen Key tool,
insert the tool in the lowest and forward
most holes on either side, where you will
see small lock screw heads. Turn the
screws counter clockwise approximately
2-3 turns to release the pressure on the
locks.
Do not fully remove these
screws
. (Fig 17-2)
(b) With the locks on both sides now loose,
you can raise or lower the camera view
angle. For this vehicle we are looking to
see two recessed rib lines below the
camera lens to indicate the correct view
angle. (Fig 17-3)
(c) Once the angle is corrected, retighten
the locking screws on each side, then
reconfirm the two recessed rib lines to
ensure the camera has not moved while
tightening the locks. (Fig 17-3)
(d)
Optional:
Use the Live View feature of
the Toyota Integrated Dashcam phone
application to confirm the view angle if
compensating for other accessories /
obstructions.
Note:
When connecting for the first time
as an installer, choose
“Remind Me
Next Time”
when you are prompted to
change the
WI-FI password.
Fig. 17-1
Fig. 17-2
Fig. 17-3
