TOYOTA CAMRY
(GAS AND HV)
2022-
DASHCAM
(Digital Video Recorder)
Preparation
Page 1 of 16 pages
Issue: A 07/25/2021
Part Number: PT949-08210 (Dashcam)
PT949-48210 (Y-Harness)
Dashcam Kit Contents
Item # Quantity Reqd. Description
1
1
Dashcam Main Unit
2
1
SD Card Holder
3
1
SD Card (16 GB)
4
1
Window Mounting Plate
5
1
Foam Tape
6
2
Cable Ties
7
1
Quick Start Guide
Y-Harness Kit Contents
Item # Quantity Reqd. Description
1
1
Mirror Patch Y-Harness
2
2
Foam Tape
3
4
Cable Ties
Additional Items Required For Installation
Item # Quantity Reqd. Description
1
1
PT949-08210 (Dashcam Unit)
2
1
PT949-48210 (Y-Harness)
Conflicts
N/A
Recommended Tools
Personal & Vehicle
Protection
Notes
Seat Protection
Dash Protection
Special Tools
Notes
PT949-IAD0E Install Aid
For Port Installations Only
Installation Tools
Notes
Panel Tool
Socket Wrench
With 10 mm Socket
Torque Wrench
With 10 mm Socket
Hooked Panel Tool
Needle Nose Pliers
For Sun Visor Clip Removal
Special Chemicals
Notes
VDC Approved Cleaner
To Clean Windshield
General Applicability
All Models
Recommended Sequence of Application
Item # Accessory
1
Y-Harness (PT949-48210)
2
Dashcam (PT949-08210)
*Mandatory
Vehicle Service Parts
(may be required for reassembly)
Item # Quantity Reqd. Description
1
Up to 2 pcs
Roof Console Clips if damage
occurs during removal.
P/N: 90467-09240
2
3
4
Kit Service Parts
(may be required in future)
Item # Part Number
Description
1
PT949-08210-AA
Camera Unit + SD
2
PT949-08210-AB
SD Card 16GB Industrial
3
PT949-08210-AC
Sd Card Holder Assembly
4
PT949-08210-AD
Window Plate with Tape
Legend
STOP:
Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY:
Use caution to avoid risk of
injury.
CAUTION:
A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT:
Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK:
This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE:
This mark indicates that torque is
related to safety.
REGULATORY MARK:
This mark indicates the
component is related to regulatory compliance
