manualshive.com logo in svg

Toyota CAMRY HYBRID 2021, Owner'S Manual

Share
Download
Toyota CAMRY HYBRID 2021 Owner'S Manual Download Page 68

66

1-2. Child safety

CAMRY_HV_GE

WARNING

■

When using a child restraint system (except for Taiwan)

●

Vehicles with front passenger occupant classification system: 
Never install a rear-facing child restraint system on the front passenger
seat even if the “AIRBAG OFF” indicator light is illuminated. In the event of
an accident, the force of the rapid inflation of the front passenger airbag
can cause death or serious injury to the child if the rear-facing child
restraint system is installed on the front passenger seat.

●

Vehicles with front passenger occupant classification system: 
A forward-facing child restraint system may be installed on the front pas-
senger seat only when it is unavoidable. A child restraint system that
requires a top strap should not be used in the front passenger seat since
there is no top strap anchor for the front passenger seat.

●

Vehicles with front passenger occupant classification system: 
A forward-facing child restraint system may be installed on the front pas-
senger seat only when it is unavoidable. When installing a forward-facing
child restraint system on the front passenger seat, raise the seatback as
much as possible, move the seat to the rearmost position, and raise the
seat to the highest position, even if the “AIRBAG OFF” indicator light is illu-
minated. 
If the head restraint interferes with the installation of the child restraint sys-
tem, and the head restraint can be removed, remove the head restraint. 
If the head restraint cannot be removed, raise it to the uppermost position.

●

Vehicles without front passenger occu-
pant classification system: 
Only put a forward-facing child restraint
system on the front seat when unavoid-
able. When installing a forward-facing
child restraint on the front passenger
seat, move the seat as far back as pos-
sible. Failing to do so may result in
death or serious injury if the airbags
deploy (inflate).

CAMRY HYBRID_OM_General_OM33F09E

Summary of Contents for CAMRY HYBRID 2021













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands