manualshive.com logo in svg

Toyota CAMRY HYBRID 2021, Owner'S Manual

Share
Download
Toyota CAMRY HYBRID 2021 Owner'S Manual Download Page 526

524

7-2. Steps to take in an emergency

CAMRY_HV_GE

(If equipped)

(Yellow)

LTA indicator (warning buzzer)

*

1

Indicates a malfunction in the LTA (Lane Tracing Assist)

Follow the instructions displayed on the multi-infor-
mation display. (

P. 312)

(If equipped)

(Flashes or 

illuminates)

PCS warning light

When a buzzer sounds simultaneously:
Indicates a malfunction has occurred in the PCS (Pre-Col-
lision System).

Have the vehicle inspected by your Toyota dealer
immediately.

When a buzzer does not sound:
The PCS (Pre-Collision System) has become temporarily
unavailable, corrective action may be necessary.

Follow the instructions displayed on the multi-infor-
mation display. (

P. 280, 530)

If the PCS (Pre-Collision System) or VSC (Vehicle Stability
Control) system is disabled, the PCS warning light will illu-
minate.

P. 298

(If equipped)

(Illuminates)

Toyota parking assist-sensor OFF indicator

*

1

Indicates a malfunction in the Toyota parking assist-sensor
function

Have the vehicle inspected by your Toyota dealer
immediately.

Indicates that the system is temporarily unavailable, possi-
bly due to a sensor being dirty or covered with ice, etc.

Clear the dirt, etc.

Slip indicator

Indicates a malfunction in:
• The VSC (Vehicle Stability Control) system;
• The TRC (Traction Control) system
• The ABS; or
• The hill-start assist control system
The light will flash when the ABS, VSC or TRC

 

system is

operating.

Have the vehicle inspected by your Toyota dealer
immediately.

Low fuel level warning light

Indicates that remaining fuel is approximately 6.7 L (1.8
gal., 1.5 Imp. gal.) or less

Refuel the vehicle.

Warning light

Warning light/Details/Actions

CAMRY HYBRID_OM_General_OM33F09E

Summary of Contents for CAMRY HYBRID 2021













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands