Toyota A442F, Repair Manual, Page: 88 / 143

AT-75
AUTOMATIC TRANSMISSION - FRONT AND REAR PLANETARY GEAR UNIT
If the thrust clearance is greater than maximum, re-
place the planetary gear.
FRONT AND REAR PLANETARY GEAR
UNIT ASSEMBLY
1. INSTALL O-RING
Coat a new O —ring with ATF, and install it to the rear
planetary gear.
2. INSTALL NO.2 THRUST WASHER
Coat the thrust washer with petroleum jelly, and in-
stall it onto the rear planetary gear.
HINT: Securely fit the lips of the thrust washer into
the holes of the rear planetary gear.
3. INSTALL FRONT PLANETARY RING GEAR
(a) Align the snap ring end with the wide cutout portion
of the rear planetary gear.
(b) Using needle nose pliers, compress the snap ring and
then install the ring gear.
(c) Check that the snap ring is installed into the groove of
the rear planetary gear.