Toyota A442F, Repair Manual, Page: 135 / 143

AT-122
AUTOMATIC TRANSMISSION - COMPONENT PARTS INSTALLATION
Bolt length:
18 mm (0.71 in.)
22 mm (0.87 in.)
28 mm (1.10 in.)
32 mm (1.26 in.)
40 mm (1.57 in.)
41 mm (1.61 in.)
42 mm (1.65 in.)
45 mm (1.77 in.)
52 mm (2.04 in.)
(d) Check that the manual valve lever contacts the center
of the roller at the tip of the detent spring.
(e) Tighten the bolts.
Torque: 10 N-m (100 kgf cm, 7 in.lbf)
34. CONNECT FOUR SOLENOID CONNECTORS
35. INSTALL OIL STRAINER
Install a new gasket and the oil strainer with the seven
wave washers (for 8 mm head bolts) and ten bolts.
Torque: 10 N-m (100 kgf cm, 77 ftlbf)
Each bolt length is indicated below.
36. INSTALL MAGNETS IN PAN
Install the two magnets in the oil pan as shown in the
figure.