Toyota 4Runner 2020 Owner'S Manual Download Page 326

Page: 326 / 596

324

4-5. Using the driving support systems

4RUNNER (U)

■

Turning off the TRAC system

To turn the TRAC system off,
quickly press and release

The “TRAC OFF” indicator light
will come on.

Press

again to turn the

system back on.

■

Turning off TRAC, VSC and Trailer Sway Control systems

To turn the TRAC, VSC and
Trailer Sway Control systems

off, press and hold

for

more than 3 seconds while the
vehicle is stopped.

The “TRAC OFF” indicator light
and the VSC OFF indicator light
will come on.

Press

again to turn the

systems back on.

Summary of Contents for 4Runner 2020





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4Runner 2020

Reviews:

Related manuals for 4Runner 2020

Brands by name

Popular brands

Toyota 4Runner 2020, Owner'S Manual

Search results

Summary of Contents for 4Runner 2020

Reviews:

Related manuals for 4Runner 2020

Brands by name

Popular brands