Toyota 4Runner 2020, Owner'S Manual

Page: 243 / 596

241
4-3. Operating the lights and wipers
4
Drivin
g
4RUNNER (U)
■ When the rear window wiper and washer switch is turned off
The rear wiper will stop operation, and return to the retracted position after
approximately 3 seconds.
However, if the engine switch is turned to the “ACC” or “LOCK” position (vehi-
cles without a smart key system) or the engine switch is turned to ACCES-
SORY mode or turned off (vehicles with a smart key system) while the rear
wiper is operating, the rear wiper will stop at that position and will not return to
the retracted position.
■
If no washer fluid sprays
Check that the washer nozzle is not blocked if there is washer fluid in the
washer fluid reservoir.
■
Customization
Settings (e.g. drip prevention function) can be changed.
(Customizable features

P. 545)
NOTICE
■
When the rear window is dry
Do not use the wiper, as it may damage the rear window.
■
When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may over-
heat.
■
When a nozzle becomes blocked
In this case, contact your Toyota dealer.
Do not try to clear it with a pin or other object. The nozzle will be damaged.