Toyota 4Runner 1999, Owner'S Manual

Page: 78 / 285

4RUNNER (
ᝌᛆ͕
)
71
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten the
top strap.
See the following instructions to install the
anchor bracket.
Bolt
Spacer
380mm
(15.0 in.)
730mm
(28.7 in.)
380mm
(15.0 in.)
Anchor
bracket
On the luggage compartment floor
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the luggage compart-
ment floor.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.524.7 N
⋅
m (1.682.52
kgf
⋅
m, 12.218.2 ft
⋅
lbf).
This model sold in Canada is provided
with a bracket set in the glove box, de-
signed for use with any of the 2 anchor
locations shown in the illustration.
If your child restraint system does not
provide any of the necessary parts, ask
your Toyota dealer. (See "Child restraint
system".)
Top strap anchors and
locations