Toyota 4Runner 1999 Owner'S Manual Download Page 155

Page: 155 / 285

4RUNNER (

ᝌᛆ

)

148

Fan speed selector

Move the lever to adjust the fan speed
to the right to increase, to the left to
decrease.

Temperature selector

Move the knob to adjust the tempera-
tureto the right to warm, to the left to
cool.

Air flow selector

Move the knob to select the vents used
for air flow.

1. Panel

Air flows mainly from the

instrument panel vents.

2. Bi−level

Air flows from both the floor

vents and the instrument panel vents.

3. Floor

Air flows mainly from the floor

vents.

4. Floor/Windshield

Air flows mainly

from the floor vents and windshield
vents.

5. Windshield

Air flows mainly from the

windshield vents.

For details about air flow selector settings,
see the illustration after "A/C" button.

Turning the Air Flow Selector to wind-
shield position turns on the defroster to
clear the front view more quickly.

Summary of Contents for 4Runner 1999






























































































































































































































































































Search results

Summary of Contents for 4Runner 1999

Reviews:

Brands by name

Popular brands

Toyota 4Runner 1999, Owner'S Manual

Search results

Summary of Contents for 4Runner 1999

Reviews:

Brands by name

Popular brands