Toyota 4Runner 1999, Owner'S Manual

Page: 45 / 285

4RUNNER (
ᝌᛆ
͕
)
38
CAUTION
When returning the seats to their
original position:
D
Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.
D
Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent seat
belt from proper operation. Be cer-
tain to replace the head restraints.
D
Make sure the bottom cushion is
securely locked by trying to pull up
the edge of the cushion near the
lock release straps.
D
Do not forget to pull out the buckle
of the side seatbelts and center
seatbelt and arranged them in their
proper position and are ready to
use.
Head restraints
Front
Rear
For your safety and comfort, adjust the
head restraint before driving.
To raise: Pull it up.
To lower: Push it down while pressing the
lock release button.
On some models, you can also move the
head restraint forward or backward. If
such adjustment is desired, pull or push
the head restraint.
The head restraint is most effective when
it is close to your head. Therefore, using
a cushion on the seatback is not recom-
mended.
CAUTION
D
Adjust the center of the head re-
straint so that it is closet to the
top of your ears.
D
After adjusting the head restraint,
make sure it is locked in position.
D
Do not drive with the head re-
straints removed.