Toyota 2005 HIGHLANDER Service Manual Download Page 342

Page: 342 / 423

’05 HIGHLANDER_U (L/O 0409)

342

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

7. Pull out the spare tire and stand

it up against the bumper.

8. Remove the holding bracket.

Vehicles with aluminium wheels—
Remove the spare tire cover.

2. Block the wheel diagonally op-

posite the flat tire to keep the
vehicle from rolling when it is
jacked up.

When blocking the wheel, place a
wheel block in front of one of the front
wheels or behind one of the rear
wheels.

—Blocking the wheel

Summary of Contents for 2005 HIGHLANDER








































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Service Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Brands by name

Popular brands