Toyota 2005 HIGHLANDER Service Manual Download Page 123

Page: 123 / 423

’05 HIGHLANDER_U (L/O 0409)

123

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

To turn on the emergency flashers,
push the switch.

All the turn signal lights will flash. To turn
them off, push the switch once again.

Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.

Always pull as far off the road as pos-
sible.

The turn signal light switch will not work
when the emergency flashers are operat-
ing.

NOTICE

To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.

To adjust the brightness of the instru-
ment panel lights, turn the knob.

Emergency flashers

Instrument panel light control

Summary of Contents for 2005 HIGHLANDER








































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Toyota 2005 HIGHLANDER, Service Manual, Page: 123 / 423

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews: